Equipment of the Toolmat^® T70:

Details

1. Base / Base addition 

- Pneumatically driven, finely meterable piston pump with double flow volume (2DF) with FPM seals, manually adjustable volume dial (0 - 0.06 ml per stroke) . Vario3 and Vario7 variations have piston pumps with simple flow (0 - 0.03 ml per stroke), individually adjustable.

- Ventilation unit integrated underneath the pump module.

- Frequency generator for pump pulses, manually adjustable 0 - 90 stroke min-1.

- Dedicated air valve to determine spray air quantity.

- Dedicated air valve to determine casing air quantity

- Manometer (0 – 10 bar) in the door front to indicate spray air pressure.

- Coupler plug for compressed air supply on left side of housing.

- Air filter / water separator with drainage opening on underside of housing.

- High grade push in/screw fittings / pneumatic tubes.

- Stable, compact metal housing (250x250x210 or 300x250x210) with robust metal closer and door seal for dust protection and noise reduction, earthing pin.

- Connection for feed tube on the left side of housing.

- Component labelling in accordance with the designations in the pneumatic connection diagram.

Pump module T70

2. Reservoirs (from 2.0 to 27 litres available):

Housing assembly

- Reservoir 2.0-/3.0-litre with plexiglass cylinder / NBR seals or glass cylinder / FPM seals. With filler neck, screw plug, detachable sieve, automatic ventilation, drainage sieve. Can be supplied with float switch min or min+max (in metal, potential-free, either NC or NO), or electric level monitoring (24V DC or 230V AC).

- Reservoir 6.0-/10-/17-/27-litre Aluminium. With filler neck, screw plug, detachable sieve, automatic ventilation, drainage sieve stopcock and fill level display. Combinated wall-housing bracket of sturdy aluminium construction 40x40 with 4 steel clips for wall installation. Can be supplied with float switch min or min+max (in metal, potential-free, either NC or NO), or electric level monitoring (24V DC or 230V AC).

Wall installation

- Reservoir 6.0-/10-/17-/27-litre Aluminium as discribed before. With wall bracket of sturdy aluminium construction 40x40 with 4 steel clips for wall installation. Can be supplied with float switch min or min+max (potential-free, either NC or NO).

 
Reservoir  2.0/3.0

Reservoir 6.0/10/17/27

Reservoir 6.0/10/17/27

3. Drive (electric, pneumatic or manual option):

- Solenoid valve 3/2 way (1300 NL/min) with auxiliary actuation (for occasional manual switching on/off). Coil with plug in 24V DC, 24V AC, 110V AC or 230V AC. Cable bushing on left side of housing. Vario3 and Vario7 also offer separate actuation control of each pump via a solenoid valve.

- Pneumatic valve 3/2 way (1300 NL/min). With push in connection ø4 for control air on left outer side of housing.

- Hand valve 3/2 way (600 Nl/min) as valve rocker on right outer side of housing.

4. Feed tube 

- Feed tube with Ø16 external tube with robust metal sleeve, two internal tubes for lubricant and air supply, constructed of PTFE Ø3. Smallest bending radius 80 mm. Standard length 3,000, non-standard lengths up to 20,000 available on request.

5. Nozzle options:

- HY: hybrid nozzle flush with the 3/8” external thread connection at the end of the feed tube.

- HY…: hybrid nozzle projects …mm out of the 3/8” external thread connection at the end of the feed tube.

6. Option

- 4 x round magnet Ø80 (mounted on the reverse side) for easy installation of the housing.

- 4 x mounting straps (mounted on the reverse side) for fixed installation of the housing.