Introduction: 

Spraymat S700 is the Venturi spray system, replacing the successful Spraymat S100 and S600 series by combining the advantages of both systems into one. Due to the modular design of the new valve block a synchronous or, if required, a separate drive of the nozzles can be realized. The new reservoirs available with 1, 6, 20 and 40 litre volume can be mounted by means of wall brackets or placed at the ground. The Venturi nozzles have been completely redesigned and are available in two sizes:  VD07 (with a capacity of up to 1l/h) and VD15 (up to 6l/h). So you can easily adopt the performance of your Spraymat S700 to your requirements just by changing the nozzle. In addition the nozzle tip can be replaced in case of damage. And for the VD07 size nozzle, the nozzle tip is available as a standard full jet or a flat-jet. pump system for spraying the smallest quantities of liquid.

Brief description: 

Low pressure system for spraying runny substances in medium quantities.

Main application range: 

External MQL in simple metal-cutting operations. Application of substances in not too small quantities. Depending on the substance and type of application, a suction is recommended

Operating principle: 

In the Venturi nozzle , the spray air produces a partial vacuum, which causes the liquid to be sucked out of the unpressurized reservoir and sprayed.

Adjustability: 

• Spray air quantity (manual)

• Quantity of liquid (manual)

• Spray air pressure (manual)

• Switch on/off using actuation control drive (electric, pneumatic or manual)