Brief description: 

Aerosol booster with piston pumps and PRO-CYCLON^® technology to produce fine oil-air mixtures.

Main application range: 

Internal MQL for single channel rotary union, middle and upper rotational speeds.

Operating principle: 

In the case of internal lubrication only the finest drops are able to get through as the centrifugal forces inside the spindle eject the bigger oil droplets. The Centermat^® C30 utilizes this effect through its use of PRO CYCLON^® technology. Coarse droplets are separated in the Centermat^® C30 early on and transported back to the supply reservoir, thereby minimizing consumption. The smallest droplets in the μ-range that remain form a fine, stable aerosol Mixture which is transported to the drill holes in the machine tool all the way through the feed tube, rotary union and spindle.

Product versions:

The basic version C30/1 provides one spray nozzle in the spray chamber and is designed for tools with a total channel cross section of 1.0 to 10 mm2. Suitable for applications where the tools have similar channel cross sections in the above mentioned range.

The full version C30/1 V7 provides two independent spray nozzles in the spray chamber and is designed for tools with a total channel cross section of 1.0 to 120 mm2. Suitable for applications where the tools have a wide range of total channel cross sections. The additional air can also be switched on/off separately and this can be used for particularly large tools or for blowing-out.

For applications with a total channel cross section of 0.2 to 3.0 mm2 a special mini spray nozzle is available on demand. 

Adjustability: 

Pump swept volume and frequency (manual), Quantity of spray air (manual), quantity of additional air (manual)

At basic version C30/1: Simultaneously switch on/off of the spray nozzle and the additional air (machine-controlled)      

At full version C30/1 V7: Separated switch on/off of the spray nozzle1, the spray nozzle2 and the additional air (each machine-controlled)