1.
Base / Base addition
At
basic version C30/1: One pneumatically driven, finely
meterable piston pump to feed one spray nozzle in the spray
chamber.
At full
version C30/1 V7: Two pneumatically driven, finely
meterable piston pumps to feed two spray nozzles in the spray
chamber.
The
following components are for both version identical:
-
Piston pumps with FPM seals, manually adjustable with scale
indicator, volume 0 - 0.03 ml per stroke.
-
Spray nozzles with dedicated air valve with manometer (0 –
10 bar) to set spray air quantity.
-
Dedicated air valve with manometer (0 – 10 bar) to set
quantity of additional air.
-
Ventilation unit integrated on the side of the pump block.
-
Frequency generator for pump pulse, manually adjustable 0 - 90
stroke min-1.
-
Manometer (0 – 10 bar) in the door front to indicate
reservoir pressure.
-
Pneumatic pressure switch to switch off nozzles in case of
pressure build up including visual display unit in the door
front.
-
Automatic ventilation valve with hand actuation.
-
Coupler plug NG8 for compressed air supply to left side of
housing.
-
Air filter with integrated water separator and drainage
opening on underside of housing.
-
Robust, compact metal housing 500x300x210 with robust metal
closer and door seal for dust protection and noise reduction,
earthing pin, 4 mounting straps for wall mounting of the
housing.
-
Connection for feed tube with push-in coupler Ø12 on the
upper side of housing.
2.
Reservoirs:
-
Aluminium reservoir, 1.5 litre inside housing with stopcock on
the reservoir outlet.
-
Float switch min (metal, potential-free, either NC or NO).
-
Hand pump for filling the reservoir and funnel tube.
-
Visual fill level display in door front.
|
