Equipment of the Sawfix^® SF:

Details

1. Base / Base addition 

- Pneumatically driven, finely meterable piston pump with  FPM seals, manually adjustable with PMC precise metering control (2), enabling easy adjustment of the volume using a dial.

- Ventilation unit integrated underneath the pump module.

- Frequency generator for pump pulses, manually adjustable 0 - 90 stroke min-1.

- A air valve to enable the quantity of spray air to be adjusted.

- High-grade push in/screw fittings/ pneumatic tubes.

- Stable, compact metal housing (200x200x155) with robust metal closer and door seal for dust protection and noise reduction, earthing pin. 

- Connections for feed tube with EASY-COAX^® system (plug-in system for speedy, simple assembly, disassembly and interchange, including EASY-COAX^® twist-stop) on the left side of the housing.

- Component labelling in accordance with the designations in the pneumatic connection diagram.

Pump module

EASY-COAX^®

2. Reservoirs (from 0.33 to 3 litres available):

- Reservoir 0.33 litre PA with screw cap, ventilation plug, drainage sieve.

- Reservoir 1.0-/2.0-/3.0-litre with plexiglass cylinder / NBR seals or glass cylinder / FPM seals. With filler neck, screw plug, detachable sieve, automatic ventilation, drainage sieve. 

Reservoir 0.33

 
Reservoir  1.0/2.0/3.0

3. Drive (electric, pneumatic, manual or mechanic option):

- Solenoid valve 3/2 way (120 Nl/min) with auxiliary actuation (for occasional manual switching on/off). Coil with plug in 24V DC, 24V AC, 110V AC or 230V AC. Cable bushing on left side of housing. 

- Pneumatic valve 3/2 way (550 Nl/min). With push in connection ø4 for control air on left outer side of housing.

- Hand valve 3/2 way (600 Nl/min) as valve rocker on right outer side of housing.

- Mechanical valves 3/2 way (700Nl/min) as plunger, roller lever or knee roller lever in versions NC or NO. Delivered with the corresponding connectors and a 2m tube PUNØ8 to the unit.  

4. Feed tube 

- Coaxial feed tube with EASY-COAX^® system. Outer tube of strong rubber construction with robust metal sleeve Ø11, inner tube for delivery of medium, constructed of long-life PTFE Ø3. Smallest bending radius 50 mm. Standard length 3,000, non-standard lengths up to 20,000 available on request.

5. Nozzleblocks:

- Nozzleblocks (Aluminium) with EASY-COAX^® system. For 1, 2 or 3 feed tubes. With optimized spray points for band saws or circular saws and elongated holes for mounting 6x18 or 6x21. 

Nozzleblocks 

6. Option

- 4 x round magnet Ø80 (mounted on the reverse side) for easy installation of the housing.

- 4 x mounting straps (mounted on the reverse side) for fixed installation of the housing.